Forum Beautiful Agony

INSTALLARE WINDOWS 7 DA UNA CHIAVETTA USB

prepare:
a) A USB flash drive with a capacity of 4GB
b ) The installation files directly from Windows 7 Operating System DVD



1. Connect the USB allla our car

2. Open the command prompt with administrator privileges, or right click sull0eseguibile Prompt / Run as administrator

3. Type "diskpart" without quotes / Return (enter)

4. Type "list disk" without the quotes / Send

5. Foglioil mark on a number generated by the PC to the USB device

6. Assuming that the USB device is "Disk 2", type the following commands, replacing the number "2" on the USB stick to our: * select disk 1


* *
clean create partition primary select partition 2

* * *
active format fs = ntfs
* assign * exit


7. Place the installation DVD of Windows 7 in the reader / writer PC

8. Remember to write down the drive letter corresponding to the DVD drive and that corresponding to the USB stick, say "E" for the DVD and "H" for USB pen

9. Tornare nel prompt dei comandi sempre con privilegi da amministratore

10. Digitare “e: cd boot” /Invio;

11. Digitare “cd boot” /Invio;

12. Digitare “bootsect.exe/nt60 h:” /Invio;

13. Copiare tutto il contenuto del disco di Windows 7 nella penna USB masterizzandolo

14. Riavviare la macchina

15. Entrare nel BIOS ( solitamente premere ripetutamente canc al riavvio) ed impostare la penna USB come drive dal quale effettuare il boot
16. Fine